Cable Machines & Functional Trainers
Cable Machines & Functional Trainers
Cable machines keep tension on the muscle through the whole movement, from rows and pulldowns to flyes, curls and single-arm work. Our range runs from a single cable tower to power racks with twin weight stacks built in, so you can add cables without giving up your rack.
| Machine | Stacks | Ratio | Size (W x D x H) | Good to know |
|---|---|---|---|---|
| REIGN Functional Trainer Power Rack | 2 x 90kg | 2:1 | 1140 x 810 x 2210mm | A full power rack with cables built in; frame rated to 450kg |
| REIGN Rear Functional Trainer Rack | 2 x 90kg | – | 1340 x 1487mm footprint | Six-post rack with the cable station in the rear bay; bolts to the floor |
| REIGN Wall-Mounted Cable Rack | 2 x 90kg (20 x 4.5kg plates each) | 2:1 | 1340 x 629 x 2209mm | Sits 629mm off the wall; 2.25kg steps at the handle; anchor bolts not included |
| Cable Tower Squat Stands | 2 x 95kg (or plate loaded) | – | 2060 x 725 x 2050mm | Twin cable towers joined by a pull-up bar; must be bolted down |
| Cable Weight Stack Tower | 95kg | – | 205cm high | A single tower for low ceilings |
| Cable Pulley Tower | Plate loaded | – | – | 115kg maximum cable load; 33 height settings |
Figures are taken from each product page; check the product page for full specifications.
How to choose
- Already have a rack? A single cable tower or plate-loaded pulley adds cable work beside it.
- Starting from scratch? The REIGN Functional Trainer Power Rack gives you a rack and twin stacks in one footprint.
- Short on floor space? The REIGN Wall-Mounted Cable Rack is only 629mm deep.
- Low ceiling? The cable towers are 205cm high. Measure before you order, and allow for fixings where a machine must be bolted down.
See also power racks and rack accessories.
Cable Machine FAQs
What does a 2:1 cable ratio mean?
With a 2:1 ratio the load at the handle is half the stack weight, and the cable travels twice as far. On the REIGN Wall-Mounted Cable Rack each 4.5kg plate adds 2.25kg at the handle, which suits single-arm work, smaller muscles and rehab.
Weight stack or plate loaded?
A weight stack lets you change the load with a pin in seconds. Plate-loaded pulleys use your own plates, so they cost less, but you load and unload plates for every change.
Do cable machines need bolting down?
Some do. The Cable Tower Squat Stands and the REIGN Rear Functional Trainer Rack must be bolted to a solid floor, and the Wall-Mounted Cable Rack is fixed to the wall. Each product page says what fixings you need.
How much ceiling height do I need?
The cable towers are 205cm high and the REIGN cable racks around 2210mm. Add a little clearance for assembly and for pull-ups if the machine has a bar.
Can I add cables to my existing rack?
Yes. Plate-loaded lat/row pulleys are made for our rack series, or you can stand a cable tower beside your rack. Ask us on chat if you're unsure what fits.
Planning a full gym? Try our free 3D gym planner to lay out your space.